The specially designed upper die lip push-pull fine-tuning structure can effectively control the thickness uniformity of the sheet within ±0.1%. The die head adopts a hanger-style flow channel design.
Get a quote
A continuous and unobstructed flow surface can be obtained at the die lip. The full-push adjustment screws with small intervals can act on the up and down rebound of the metal. The die lip can be bent to adjust the die gap. The movable lower die lip design is suitable for different thickness requirements of extruded sheets. The die body is chrome-plated inside and outside, and the die cavity flow channel is hard chrome-plated to achieve anti-corrosion and anti-sticking effects. The fasteners use 12.9 grade high-strength bolts and high-quality, built-in stainless steel heating rods to control heating in different zones.
Get a quoteStable production, simple structure, easy to disassemble and clean.
Product features: safe and environmentally friendly, waterproof, non-slip, fireproof and moisture-proof, quiet, super wear-resistant, and convenient construction.
Superior quality and good pressure bearing, light weight, diverse colors, good flexibility, good thermal conductivity and warmth retention, and easy maintenance.
A continuous and unobstructed flow surface can be obtained at the die lip. The full-push adjustment screws with small intervals can act on the up and down rebound of the metal. The die lip can be bent to adjust the die gap. The movable lower die lip design is suitable for different thickness requirements of extruded sheets. The die body is chrome-plated inside and outside, and the die cavity flow channel is hard chrome-plated to achieve anti-corrosion and anti-sticking effects. The fasteners use 12.9 grade high-strength bolts and high-quality, built-in stainless steel heating rods to control heating in different zones.
Get a quoteStable production, simple structure, easy to disassemble and clean.
Product features: safe and environmentally friendly, waterproof, non-slip, fireproof and moisture-proof, quiet, super wear-resistant, and convenient construction.
Superior quality and good pressure bearing, light weight, diverse colors, good flexibility, good thermal conductivity and warmth retention, and easy maintenance.
With a fully push-type adjustable upper die lip device, it can produce sheet products of 0.1-2.5mm, and the die head adopts a hanger-type flow channel design.
Get a quoteStable production, simple structure, easy to disassemble and clean.
Applicable to: PC, PMMA, HIPS, PP, PE, EVA, CPE, etc.
Features: Automatically adjust the die lip and quickly adjust the die discharge gap, the discharge is smooth and even, the adjustment is flexible and convenient, and the material distribution outlet adjustment can produce products with large thickness differences on the same unit.
The mold uses a hanger-type flow channel inside, and the mold uses a 45-degree inclined flow control rod adjustment device to facilitate the adjustment of the flow size and speed inside the die head. A full set of stainless steel high-temperature resistant heating tube constant temperature devices are used to save power consumption to the maximum extent.
Get a quoteAlloy tool steel with small thermal deformation and good stability is used after quenching and tempering, and the inner and outer surfaces are polished, hard chrome plated, and ground.
Internal plugging device and external width adjustment device with the function of eliminating thick edges.
Features: The internal plugging width adjustment device has the function of reducing thick edges through online adjustment, and is mainly used for laminating production. Due to its special adjustment requirements, its mold flow channel is also specially designed, saving time, labor and materials. The external plugging type cannot be used for online continuous width adjustment.
Get a quoteWidth adjustment method: external sealing adjustment, internal sealing adjustment, double sealing adjustment.
The hanger-type runner is designed based on the analysis of raw material characteristics (viscosity, temperature, rate).
The polishing finish of the mold cavity is O.Olum - 0.06um, and the surface finish of the melt flow hole is 0.03um-0.10um. It adopts internal heating of the heating rod or external heating of the heating plate, and hot oil circulation temperature control.
It is suitable for PET, PBT, PA, PP, PE, PTFE, PS, EMA, EVA, TPU, carbon fiber and other materials.
Get a quoteRoll-on, scratch-free coating die: through the die, the active substance slurry is evenly coated onto the collector fluid;
Current coating dies commonly used in the lithium, electronic coating and PCB industries;
The scratch-free coating head is the core component in the coating field, and its function is to achieve uniform coating for the coating slurry;
Customised design of key parts such as cavity flow and runner lip according to the rheological characteristics of the customer's slurry, to provide higher quality and more precise coating requirements;
The coating head is equipped with a variety of adjustment methods to provide a greater variety of options for the customer's needs;
Special hanger-type structure, no flow blocking rod design.
The die body is plated with alloy chrome to fully improve the hardness, surface finish and service life of the die head.
Multiple sets of water cooling adjustment devices meet the requirements of products of different thicknesses, and can produce 3-30mm plate products.
Special technical treatment to prevent material blocking and surface scratches during the extrusion process to the greatest extent.
Get a quote