The hanger-type runner is designed based on the analysis of raw material characteristics (viscosity, temperature, rate).
The polishing finish of the mold cavity is O.Olum - 0.06um, and the surface finish of the melt flow surface is 0.03um-0.05um. It adopts internal heating of the heating rod or external heating of the heating plate, and hot oil circulation temperature control.
It is suitable for PET, PBT, PA, PP, PE, PTFE, PS, EMA, EVA, TPU, carbon fiber and other materials.
Get a quoteCalcite coating on the fluid viscosity is low in very thin dry film conditions to achieve accurate coating of the product, we use a special runner design, high-precision coating die head can ensure the stability of product uniformity.
The hanger-type runner is designed based on the analysis of raw material characteristics (viscosity, temperature, rate).
The polishing finish of the mold cavity is O.Olum - 0.06um, and the surface finish of the melt flow surface is 0.03um-0.04um. It adopts internal heating of the heating rod or external heating of the heating plate, and hot oil circulation temperature control.
It is suitable for PET, PBT, PA, PP, PE, PTFE, PS, EMA, EVA, TPU, carbon fiber and other materials.
Get a quoteThe conventional die head model is 430mm-2400mm, and the meltblown head (spinneret) diameter is 0.2mm-0.3mm.
The center distance of the spinneret hole is between 0.7mm-0.8mm
Suitable for process temperature below 350, carbon fiber 330-350, PP, PET below 300
Suitable for production output of 30-50KG/hour, which can also be determined according to the production line configuration capacity.
(1) Medical and health fabrics: surgical gowns, protective clothing, disinfection wraps, masks, diapers, sanitary napkins, etc.;
(2) Home decoration fabrics: wall coverings, tablecloths, bed sheets, bedspreads, etc.;
(3) Clothing fabrics: lining, adhesive interlining, wadding, shaping cotton, various synthetic leather base fabrics, etc.;
(4) Industrial fabrics: filter materials, insulation materials, cement packaging bags, geotextiles, covering fabrics, etc.;
(5) Agricultural fabrics: crop protection fabrics, seedling raising fabrics, irrigation fabrics, thermal insulation curtains, etc.;
(6) Others: space cotton, thermal insulation and sound insulation materials, oil-absorbing felt, cigarette filters, tea bags, etc.;
The hanger-type runner is designed based on the analysis of raw material characteristics (viscosity, temperature, rate).
The polishing finish of the mold cavity is O.Olum - 0.06um, and the surface finish of the melt flow surface is 0.03um-0.04um. It adopts internal heating of the heating rod or external heating of the heating plate, and hot oil circulation temperature control.
It is suitable for PET, PBT, PA, PP, PE, PTFE, PS, EMA, EVA, TPU, carbon fiber and other materials.
Get a quoteThe conventional die head model is 1.1M-1.6M, and can also be customized according to customer special requirements.
The diameter of the meltblown head (spinneret) is 0.2mm-0.3mm, and the center distance of the spinneret hole is between 0.7-0.8 mm.
Suitable for process temperature below 35℃, carbon fiber 330-350℃, PP, PET below 300℃.
Suitable for general output of 30-50KG/hour, special requirements below 80KG/hour, and can also be determined according to the production line configuration capacity.
The hanger-type runner is designed based on the analysis of raw material characteristics (viscosity, temperature, rate).
The polishing finish of the mold cavity is O.Olum - 0.06um, and the surface finish of the melt flow surface is 0.03um-0.04um. It adopts internal heating of the heating rod or external heating of the heating plate, and hot oil circulation temperature control.
It is suitable for PET, PBT, PA, PP, PE, PTFE, PS, EMA, EVA, TPU, carbon fiber and other materials.
Get a quoteThe conventional die head model is 1.1M-1.6M, and can also be customized according to customer special requirements.
The diameter of the meltblown head (spinneret) is 0.2mm-0.3mm, and the center distance of the spinneret hole is between 0.7-0.8 mm.
Suitable for process temperature below 35℃, carbon fiber 330-350℃, PP, PET below 300℃.
Suitable for general output of 30-50KG/hour, special requirements below 80KG/hour, and can also be determined according to the production line configuration capacity.
The hanger-type runner is designed based on the analysis of raw material characteristics (viscosity, temperature, rate).
The polishing finish of the mold cavity is O.Olum - 0.06um, and the surface finish of the melt flow surface is 0.03um-0.04um. It adopts internal heating of the heating rod or external heating of the heating plate, and hot oil circulation temperature control.
It is suitable for PET, PBT, PA, PP, PE, PTFE, PS, EMA, EVA, TPU, carbon fiber and other materials.
Get a quoteThe conventional die head model is 1.1M-1.6M, and can also be customized according to customer special requirements.
The diameter of the meltblown head (spinneret) is 0.2mm-0.3mm, and the center distance of the spinneret hole is between 0.7-0.8 mm.
Suitable for process temperature below 35℃, carbon fiber 330-350℃, PP, PET below 300℃.
Suitable for general output of 30-50KG/hour, special requirements below 80KG/hour, and can also be determined according to the production line configuration capacity.
Multilayer Manifold Dies
Each layer of flow channel is specially designed for each specific polymer. Comparing with co-extrusion through die and feed block, Multilayer manifold die can get more uniform and accurate proportion of each layer of polymer. There are separate temperature control units in each layer of flow channel, with heat insulation device.
Suitable for co-extrusion of different polymers with different melting points, the largest melting temperature difference is 80℃.
Get a quote
The die adopts coat-hanger flow channel and unique design of restrictor-bar without dead corner.
Adjusting different thickness without halting the line.
Quickly lip gap system will Shorten the thickness adjustment time. Longest working time, No dead corner No Scratch, Producing Terperature will be controlled at ±1℃.
Improve the plasticization processing and Assure even thickness.
Advantage:
PVC Fast lip open sheet Die with super Clear, Smooth Surface, Less spherulites. less waterprint, high impact resistance and easy processed.
Get a quote
Full computer CNC machining, adopt unique material heat treatment technology, metal stress relieving device and other auxiliary equipment, improve the stability of materials, hardness and rigidity, effectively prevent the product from stress deformation, breakage and other phenomena in the course of using.
Get a quoteDie body inside and outside surface chrome plated and corrosion prevention, the surface of the cavity flow channer surface plating hard chromium, plating of nickel phosphorus alloy and anti-sticking processing.
According to different raw material rheological compact die body structure to make the design.
Die body temperature of each layer is controlled independently. Using combined die body structure, convenient cleaning flow channel independently.
Cooperate with co-extrusion composite multi-layer distributor can produce much more layers product.